Y Axis Metallographic Cutting Machine with Large Screen Control or
QGZ-90 Automatic Metallographic Sample Cutting Machine
QGZ-90 metallographic sample cutting machine is a precision cutting
machine integrating automatic mode and manual mode. With the X axis
worktable, it has automatic and continuous cutting function along
the Y axis. With the function of adjusting the height of spindle,
it is used for a variety of shapes, sizes and materials sample
cutting. The cutting ability can meet the daily production
inspection and laboratory detection for cutting samples.
1. The chief motor adopts frequency conversion motor. The rotating
speed adjusts from 500r/min to 3000r/min, and the speed stability
won’t be changed due to the load. It meets the cutting needs of
2. The height of the spindle can be adjusted, it adapts to small
and thin diamond cutting disc or big abrasive cutting disc. It
compensates the wear and tear of cutting disc, effectively improves
the cutting disc and saves the cost.
3. With the optional X axis worktable, it can realize the
continuous cutting along the Y axis under automatic mode.
4. With horizontal automatic or manual feeding mode, flexible
feeding method and large feeding travel, it can be applied to large
5. It can choose the program to control feeding for accurate
6. With large sample observation window, it is more convenient for
the user to observe sample cutting process.
7. With the exhaust device, it can guarantee the efficient
discharge of steam and smoke when cutting, and make the observation
8. With LED lighting design regulation, it can realize the
effective illumination of the whole area of cutting room.
9. The filter tank adopts a magnetic system, when the circulating
water goes through the magnetic system, the metal cutting debris
will be sucked out by the magnetic system and excluded out. It
increases the cutting effect of the sample and the frequency of use
of circulating water, and avoids the blockage of the drainage
system of laboratory.
|Operating Mode||Manual / Automatic|
|Appearance||Metal shell, Explosion proof transparent observation window|
|Cutting Disc Size||Φ300×2×Φ32mm|
|Rotating Speed of Spindle||500-3000r/min|
|Max. Cutting Ability||Max. Φ90mm Round bar|
|Feeding Method||Horizontal feeding: The motor drives the horizontal screw for
cutting feed. The feeding speed can be adjusted of 1-40mm/min.|
Automatic mode——Automatic feeding, it will automatically return to
the original when arriving the set position.
Manual mode——Slewing hand wheel control or keyboard control (motor
driven, manual control).
|Lifting Travel of the Cutting Spindle||50mm|
|Lifting Method of the Cutting Spindle||Slewing hand wheel control|
|Y axis Travel||260mm|
|X axis Travel of the Movable Table||40mm|
|Cutting Platform||Size: 435×300mm, 12mm groove T type working table|
|Cutting Fixture||Rapid push and pull type vise, one set each for left and right
operation. Jaw height: 60mm|
|Key Operation||LCD touch screen and poly dome, Emergency stop button|
|Room Lighting||Built-in LED lighting|
|Cooling System||Three cooling water and one cleaning water|
|Magnetic Filtering Circulating Water Tank||80L|
|Motor||3kw Frequency conversion motor|
|Power Supply||380V, 50Hz|